Treating Djed-Hapi’s wrappings

Djed-Hapi’s mummy is in good condition overall. The outer linen wrappings are mostly stable and retain some flexibility, although folding or heavily manipulating them would cause them to tear. Several of the ends of the linen bands are loose, and some are slightly frayed. The linens around his feet, however, are more significantly damaged. You can see in this detail photo the bottom of his big toe is exposed where the linens have been damaged at the bottom of his feet.

View of the bottom of Djed-Hapi's feet. The red arrow points to his exposed toe!

View of the bottom of Djed-Hapi’s feet. The red arrow points to his exposed toe!

There are also lots of metal pins visible, which were used to secure areas of loose or falling linen. These pins belong to at least two campaigns of treatment. One set is of steel pins with flat heads, some of which were painted beige to hide them, but not until after they were already inserted in the linens and are now in some places stuck to the fabric. The other set is of black insect pins with brass heads. There is also evidence of adhesive used in a few places to secure loose linen pieces.

Detail of the linens on the right side of Djed-Hapi's body. The red circle highlights a metal insect pin, and the green oval shows where adhesive was used to reattached broken linen.

Detail of the linens on the right side of Djed-Hapi’s body. The red circle highlights the brass head of an insect pin, and the green oval shows where adhesive was used to reattach broken linen.

Archival photos of an old display case here at the museum reveal that Djed-Hapi was removed from his coffin and displayed separately at least once. Currently, there are areas of hislinen wrappings which are folded back or otherwise misaligned, and it is likely this occurred when he was replaced in his coffin after being removed.  I was concerned about the condition of these areas of Djed-Hapi’s linen wrappings, and I decided that removing him once again from his coffin would give me much better access to assess and treat these areas properly.

It took 5 people – one at the head, two at the shoulders/torso and two at the lower legs/ankles – working together to lift Djed-Hapi out of his coffin and on to a foam-covered board support. We took special care to support his loose ankles, and to keep the head from shifting.

Left and right views of Djed-Hapi, after removing him from his coffin base.

Left and right views of Djed-Hapi, after removing him from his coffin base.

To begin the conservation treatment, the exterior linens and cartonnage pieces were cleaned using a HEPA-filtered vacuum with variable suction and soft brush. Next, the pins in the linen wrappings were removed systematically. In total, 16 steel pins and 42 insect pins were removed!

Folds and creases in the linen wrappings were humidified and flattened using GORE-TEX fabric, which acts as a moisture barrier, allowing water vapor to permeate to the linen wrappings but preventing any liquid water from wetting and staining the linen. The linen was allowed to humidify for ~10-15 minutes. Then the areas were either lightly weighted, or clamped between sheets of Volara to flatten.

During (left) and after (right) humidifying and flattening creases in Djed-Hapi's linen wrappings.

During (left) and after (right) humidifying and flattening creases in Djed-Hapi’s linen wrappings.

These areas could then be realigned, and were stabilized using nylon bobbinet fabric. The bobbinet was painted out using acrylic paints to match the color of the linen, and cut into bands which were long enough to reach from one side of the cartonnage pieces, around the back and to the other side. These bands were secured using tabs of Japanese tissue also toned with acrylics. These tissue tabs were adhered to the bobbinet using 3% Klucel  in ethanol, then secured to the mummy using 5% methylcellulose in deionized water. The tabs were tucked under either the cartonnage chest and leg pieces, or the top layer of linen. A few small sections of lifted linen, particularly along the sides of the mummy, were realigned and adhered using Japanese tissue and 5% methylcellulose in deionized water.

On the left, a detail of tissue tabs on bobbinett. On the right, before (top) and after (bottom) humidification and realignment, followed by a bobbinett support.

On the left, a detail of tissue tabs on bobbinet. On the right, before (top) and after (bottom) humidification and realignment, followed by a bobbinet support.

Because of how damaged and distorted the cartonnage foot covering was, it was removed from the mummy and treated separately (I’ll talk about this in the next blog post). This also allowed me to better see the linen wrappings around Djed-Hapi’s feet, and treat them more successfully. The linens around the feet were also encapsulated using toned bobbinet. Separate strips were used to support the linen around the ankles, under the heels, around the tops of the feet and around the toes. These bands were stitched together using hairsilk toned with acrylic paint.

Before (left) and after (right) using toned bobbinet to stabilize and secure the linen wrappings around Djed-Hapi's feet.

Before (left) and after (right) using toned bobbinet to stabilize and secure the linen wrappings around Djed-Hapi’s feet.

Here is an annotated image showing the bobbinet bands, and the locations of all the removed pins:

After treatment annotated image of Djed-Hapi.

After treatment annotated image of Djed-Hapi.

You may notice this image also gives away a big decision I had to make regarding the treatment of Djed-Hapi’s mask….stay tuned for the next post to learn all about it!

 

  • Alexis North, Project Conservator

Say hello to Djed-Hapi

I apologize in advance for those of you who might be waiting for more updates on the Middle Kingdom boat model I started working on a while ago. That object was put aside temporarily to make room for all the pieces that recently came into the Artifact Lab when we deinstalled our Mummy Room and Secrets and Science galleries. While the cases in those galleries were reinforced to better withstand vibrations from the hospital construction next door, and new mounts designed and made for many of the objects, we were working hard to assess the condition of all the pieces, and treat them as necessary before the galleries reopened. This was a pretty short turn around, and several of us in the Conservation Department here chipped in to help make sure every object was looked at properly before they went back on display.

While most of the objects are in good condition, and only needed a little surface cleaning to remove accumulated dust, some needed much more complicated and detailed treatments. I began by looking at our mummy Djed-Hapi, who is the first mummy you see when you enter the Secrets and Science gallery.

Djed-Hapi, with his coffin lid and base (E3413A-C), in the Egyptian Mummies: Secrets and Science gallery.

Djed-Hapi, with his coffin lid and base (E3413A-C), in The Egyptian Mummy: Secrets and Science gallery.

As you can see, In the original case design Djed-Hapi rests in his coffin base, while the lid is suspended above on a metal shelf. Unfortunately, the coffin lid will not be returning to the case, as the shelf it used to rest on cannot withstand the level of vibrations which may occur. Don’t worry though! It will remain in the Artifact Lab and be conserved as part of a future treatment project.

As for Djed-Hapi himself, we know that he dates to the Ptolemaic period (305-30 CE). We know his name, and in fact the names of several of his family members, because of the hieroglyphs written on his coffin lid. Here is an archival image of Djed-Hapi’s coffin lid and base, and you can see all the text written on the lid:

Scan of an archival negative showing E3413B-C.

Scan of an archival negative showing E3413B-C.

He was x-rayed in 1980, and from these images we can tell that he was a man who lived into his 50s before he died. While these old x-ray images were serviceable, we decided to re-x-ray him in our digital x-ray suite here at the museum, because we felt we could get a better level of detail with the digital system.

Djed-Hapi getting his x-rays taken in 2016 (left) and 1980 (right).

Study of these x-rays revealed some very interesting facts about Djed-Hapi’s mummification. His head is completely detached from his body, cleanly separated between two of the vertebrae in his neck.

Detail of the 1980 x-radiograph of Djed-Hapi's head. The red arrow shows where his spinal column stops.

Detail of the 1980 x-radiograph of Djed-Hapi’s head. The red arrow shows where his spinal column stops.

This was not his cause of death, but happened during mummification, and seems intentional. Starting in the Ptolemaic Period, the mummification process shifted from removing the deceased’s brain through the nose, to removing it through the base of the skull. The x-rays also show that Djed-Hapi’s nasal cavity seems to be intact, so this change in the mummification process may be the reason Djed-Hapi’s head was removed, then replaced and carefully wrapped with the rest of the body. The decapitation is not visible from the exterior, and in fact his head and neck area are quite stable.

The x-rays also reveal a bit about the condition of Djed-Hapi’s body underneath the wrappings. His skeleton is well-articulated (except for his head of course), including all his finger and toe bones, and you can even see the soft tissue preserved, which implies the body is in good condition. However, a closer look at his ankles shows that there is a rather large gap between the distal ends of his tibiae (shin bones) and his tarsals (ankle bones). While there is no evidence of damage to the exterior of the linens, we can tell whenever we have to move the mummy that the ankle area has some movement. This is an issue which could lead to further damage in the future, so careful handling is required.

2016 x-ray of Djed-Hapi, showing well-preserved soft tissue. The red rectangle highlights the gap between the bones in his ankles.

Next up, I’ll discuss the conservation treatment of Djed-Hapi’s mummy, and his coffin base.

Alexis North is the Project Conservator for the Egyptian Storage Move Project, Penn Museum.

References:

Fleming, S. (1980). The Egyptian mummy: Secrets and science. University of Pennsylvania.