Picture (im)perfect

Hello again from CLA (or at least from our home offices)! As we’ve mentioned before, conservators love to look at records relating to the objects we’re treating. It helps us to gain insights into the artifact’s history and gives us context for what we see on the bench in front of us. While we don’t always have exhaustive information about every single piece, it’s always interesting to do a little research when we can. One of our recent blog posts discussed how we’ve used archaeological renderings to understand traces of colors on our objects; this post will take a look at how photographic records can inform us about the current condition of the pieces.

Photograph of the Penn Museum Archives
A view of the Penn Museum Archives.
Each of these boxes is filled with a treasure trove of information.

Before the CLA team dove into the hands-on work last fall, we took a trip to the museum’s extensive archive collection to do some digging into the history of Merenptah’s palace. With the help of Alex Pezzati, Senior Archivist, we were able to read through the records of the excavation, led by Clarence Fisher from 1915-1920. Our research was also guided by the work of Dr. Kevin Cahail, whose own forays into the archives have revealed a lot of missing details about the site. He was able to provide a lot of insights into what we were seeing in the photographs.

One of the things that impressed us most about the excavation images is the sheer scale of the architecture. While we’re very familiar with our columns and doorways by now, it’s quite another thing to see them in situ. The picture below shows columns and pylons (trapezoidal gateways) from Merenptah’s Coronation Chapel. These objects were previously exhibited at half height because the ceilings in the downstairs gallery were too low, but they’re about 25 feet tall. Part of our project for the new galleries is to figure out how to display these columns at their full height so museum visitors can experience them the way the Egyptians would have. In the meantime, it’s a useful reminder to look at images like this to remind ourselves that they stood for several thousand years!

Site image of the Coronation Chapel during excavation
The Coronation Chapel mostly excavated. The columns would have had capitals, but otherwise are at their full height.

Another thing you might notice in that image is all the water on the ground. The site is in the Nile flood plain and experienced several very wet seasons. We could tell from the current condition of the stone that it had been waterlogged. Stone is often thought of as being hard and unchangeable, but this particular Egyptian limestone contains a lot of clay, so it becomes very soft when wet. Fisher’s notes talk about how fragile the stone was, and ultimately how they made the decision to bring the pieces back to Penn before they deteriorated even more. The stone was still damp when it was wrapped in linen and packed into wooden crates – which explains the fabric impressions we see in the surface of some of the pieces.

Workers preparing columns for shipping and stone with textile impressions
(Left) Workers preparing the column pieces for shipping. (Right) An example of the stone surface with impressions of the textile weave.

Images from the site are incredibly useful tools when we’re looking at damage to an object and trying to determine the cause – whether the damage occurred before excavation or due to more recent changes. They’re also helpful when we’re trying to figure out the extent of old repairs. When the pylon pieces were installed in the gallery in the 1920s, they were extensively restored with plaster and paint. We could also tell that some lost stone had been replaced with bricks and cement, but it was difficult to tell where the restoration ended and the stone began. Fortunately, there were a lot of pictures taken of the coronation chapel while it was being excavated.

Coronation Chapel pylon
(Left) The left pylon during excavation. Notice that the row of figures second from bottom is almost completely lost. (Right) The same object with plaster reconstruction. The detail was based on the other pylon, which is much more intact.

Looking at the original photographs of the left pylon, we could tell that it had already suffered significant surface loss to the bottom and middle sections. We could also see that even though it was still standing, the middle part had broken into several pieces. Using that knowledge during the deinstallation process, we were able to rig around the damaged areas and to remove the old restoration material so the pieces could be separated. When the pylons are reinstalled in the renovated galleries, they will be safely displayed on custom steel support structures. We’re working on how to replicate the decoration, but we’ll make it clear what is original and what is new.

During our time in the archives, we discovered one thing that hasn’t changed much – archaeologists love site dogs.

Site animals
Some pictures of very good dig dogs over the years… and one very cute baby fox (bottom left)!

The right tools for the (monumental) job

Greetings from the Penn Museum’s Conservation Lab Annex (CLA)! You may remember from our first post the scale (large!) and types of objects we are going to be working on over the next few years. We are mostly working on architectural elements like doorways, windows, and columns that were part of the palace complex of the Pharaoh Merenptah, who ruled Egypt from Memphis from 1213–1203 BC. To put things in perspective, the doorway we are currently working on is over 12 ft tall and many of its fragments weigh hundreds of pounds. That means we have had to add a few new tools that are not typically found in a museum’s conservation lab. Most recently we’ve started utilizing a lot of new tools including a forklift, a gantry, and large-scale sandboxes.  

  • Forklift – A few weeks ago, the whole Ancient Egypt and Nubia Galleries Team attended a certification workshop in forklift operation. The certification course taught us the basics in how to safely operate our electric forklift. Having our own forklift onsite allows us to easily move some of the large stone fragments in and out of the lab, reorganize the layout of the warehouse to create space for rigging and lifting, and organize all of the Merenptah Palace pieces into one area.   
Egyptian Section Curator Dr. Jennifer Wegner smoothly maneuvering the forklift during our training session.
  • Gantry – At CLA we have a gantry crane in the warehouse which allows us to rig and lift some of the heaviest objects and fragments. This is especially important when we are trying to dry-fit pieces together before making more permanent joins. There are lots of different ways to rig or strap a fragment for lifting, but we’ve found that using shorter straps with a choke hitch is the safest way to lift our artifacts. In the photo below you can see that’s exactly what we’ve done. Once we have the straps secured and fully supporting the object, we begin to slowly lift, making sure the straps settle and don’t slip or re-adjust, dropping the object.  
CLA team using the gantry to lift part of the lintel from Doorway 1.
  • Sandbox – Sandboxes are often used in conservation to support objects during joining. Using a sandbox, we can place an object inside at whatever angle we need to in order to support the object on top with nothing but the weight of gravity. At CLA, our objects are quite large, so we are using old shipping crates and converting them into large sandboxes to accommodate our needs. In the photos below you can see the process of moving a fragment into the sandbox and then in the second photo you can see that fragment has been placed in such a way that it can now support the weight of the second, joining fragment on top of it. The blue tape serves as a guide to help us know exactly how the two pieces fit together once we have applied the adhesive and are ready to do the final joining. 
CLA team moving part of the lintel from Doorway 1 into a sandbox.
Fragments of Doorway 1 lintel being dry-fit together in the sandbox prior to joining.
  • Dremel – Lastly, and on a much smaller scale, we’ve been using a few different power tools. The most helpful so far has been the Dremel. While the Dremel is not a completely foreign tool to many conservators, it is most often used for making mounts or sanding fills and/or cross-sections. In this case we are using the Dremel to cut and remove all restoration pins that have become heavily corroded over the years, expanded, and are causing damage to the stone.   
Corroded ferrous pins from a previous restoration being cut and removed from Doorway 1 fragments.

As with any job, having the right tools is really important, for success and safety! We look forward to continuing to share the progress we’ve made on this project from our home offices, as we continue to work from home.