Tag Archives: Tawahibre

Mystery fiber

Posted on by
7

In a recent blog post I mentioned that I am working on the painted coffin of Tawahibre, which has fibers mixed into the ground layer (gesso). In my examination prior to starting treatment, I had noted these fibers, and observed that they are present all over the coffin lid, mixed into the ground layer just below the painted surface. They are exposed in many places where there are losses-here is an image of one area where the surface of the coffin is badly damaged, revealing these fibers:

Fibers visible in the ground layer of the painted coffin lid

There are quite a lot of these fibers in some areas (as seen in the photo above), and then in others, there are very few. They are found in areas where the ground is thick and also where it is applied very thinly. They are not arranged in any particular way-they appear to have been mixed haphazardly into the ground. The fibers are light brown in color, and while most of them are very stiff, they react almost immediately to moisture, becoming very flexible when wet. I had initially assumed that these were plant fibers-possibly flax-but they always seemed a bit odd, and to be honest, these fibers remind me a little bit of sinew (animal tendon).

As I have been working on the coffin, several of these fibers “presented themselves to me” for sampling-meaning, as I’ve been working to stabilize some of the areas with these fibers, a couple became detached, allowing me to investigate them further using PLM. So far I have looked at 2 samples, and both look the same. I prepared the fibers by mounting each one on a glass slide with water. When looking at them in plane-polarized light, they look like this:

Two different fibers from the coffin ground layer viewed at 50X magnification

I didn’t really know what I was seeing-it was difficult to pick out any really distinguishable features, so I then viewed both fibers under crossed polars. This is what I saw:

Same two fibers viewed under crossed polars at 50X magnification

What the heck is that? I’ve never seen anything like this before. When I showed this to a few other people, the first reaction has been-it looks like a worm! And it totally does. This very regular banding pattern has got to be characteristic of something-I just don’t know what.

I thought I had a lead last week-I found this image in a book, showing a bundle of sisal fibers with a commonly-seen spiral element:

Sisal sample showing a characteristic spiral element. Image from “Color Atlas and Manual of Microscopy for Criminalists, Chemists, and Conservators” by Nicholas Petraco and Thomas Kubic, p. 94.

However, just last week I obtained a sisal sample from one of the Winterthur art conservation graduate students and I’m pretty sure that’s not what I have. The sisal sample looks distinctly different to me-here it is in both plane polarized light and under crossed polars:

Sisal reference viewed at 400X magnification in plane polarized light (left) and crossed polars (right). Also, note the difference in magnification between these fibers, viewed at 400X, as opposed to the coffin mystery fibers above, viewed at 50X.

For the moment, I’m stumped. But I’m continuing to investigate this and to get input from colleagues, and I’m open to suggestions/ideas! I’ll also certainly provide more information when I know more. To be continued…

 

A sticky issue: choosing a consolidant for our painted coffin

Posted on by
2

In a previous post, I described some of the issues we’re facing in the treatment of our painted coffin of Tawahibre.

The top of the coffin before treatment – note the large losses and areas where the paint and gesso are just barely hanging on by a (plant fiber) thread

We’ve managed to clean much of the painted surface, but there are many areas of the paint and gesso that are so fragile, you get the feeling that a deep exhale – not to mention a sneeze – would send fragments flying. (And when I say gesso, I’m referring to the calcium carbonate preparatory layer/ground, which has plant fiber inclusions, that I’d like to investigate further).

Such areas require consolidation. We use this word, consolidation, a lot in conservation, and many of our treatments involve this process. Consolidation is essentially the reunification/reinforcement of a weak or powdery substance through the application of a material that we refer to as a consolidant. Consolidants often consist of dilute adhesive solutions, and they may be applied directly to artifacts with a brush or syringe, by spraying onto the surface, and in some instances, it may be appropriate to immerse an artifact in a consolidant solution. Ideally, a good consolidant must be stable (good aging properties), reversible (can be removed if necessary), and should not change the appearance of the artifact.

We have mixed up a variety of consolidant solutions to have on hand in the Artifact Lab – here are a few, along with some brushes, a plastic pipette, and syringes

Choosing an appropriate consolidant requires testing ahead of time. To start, it is important to test a variety of solvents (such as water, acetone, ethanol) – knowing which solvents can be used safely on a particular artifact will likely narrow down the range of adhesives that can be used (due to the fact that many adhesives are only soluble in a select number of solvents). In the case of our painted coffin, this involved testing all of the colors of the painted surface as well as the gesso substrate. Testing was carried out by rolling a swab dampened with each solvent over a discreet area and then observing the area for changes.

Solvent testing on an area of blue paint

After carrying out these tests, I did some research into what other conservators have used successfully for similar treatments on similar artifacts. In our field, we are fortunate to have a good body of published literature, and there is increasingly more information that can be found on the web as well. The sources I referred to included articles in the Journal of the American Institute for Conservation (JAIC), and a variety of books that have been published on the subject of conservation of Egyptian collections. Websites/blogs that I have found really useful include Inside the Conservator’s Art: A behind-the-scenes look at conserving Egyptian artifacts at the Phoebe A. Hearst Museum of Anthropology, conservator’s entries on the Brooklyn Museum blog, and the British Museum’s online collections database, which has many records with detailed conservation treatment information. There are actually lots of great blogs and websites out there, and I am grateful to my colleagues for actively sharing information in this way.

After this work, I selected several consolidants, and conducted another round of testing. During my testing I discovered that water was the key to getting the paint and the gesso to relax. Unfortunately, the painted surface is sensitive to water, but I found that a 50:50 mixture of water and ethanol is acceptable for use, especially when applied in a solution behind the lifting paint. In the end, we’ve chosen to consolidate the very fragile paint with a solution of methyl cellulose (a water-soluble cellulose ether) in a 50:50 water/ethanol mixture. To re-adhere larger flakes and chunks of gesso, we are experimenting using higher concentrations of methyl cellulose alone, and in combination with other adhesives, including Lascaux, a water-based acrylic resin.

An area near the foot of the coffin, before (left) and after (right) readhering detached gesso and consolidating paint

As I’ve stated before, this will be an ongoing project in the Artifact Lab – we will continue to report on our treatment progress, and any interesting discoveries made along the way (which is inevitable!).