Analysis of the shabti box varnish

This is a long overdue post about the varnish on our beloved shabti box (in my last post I referred to the box as troubled…I’ve developed a tiny bit of a love-hate relationship with it, which I’m only now admitting).

A detail of the shabti box before treatment, showing the actively flaking and fractured orange-yellow varnish

A detail of the shabti box before treatment, showing the actively flaking and fractured orange-yellow varnish

Anyway, I’ve briefly mentioned that we believe that the varnish on our shabti box is a pistacia resin, but how did we come to this conclusion? I started out by doing some research into similar objects, and into painted wood from the New Kingdom in general. As I mentioned in a previous post, we know that some painted wooden objects were varnished with pistacia resin during this time period, and these varnishes often look like the coating we see on our shabti box. But there were some things about the coating, including the fact that it was actively flaking, and the fact that there are areas on the box where the paint is lost and where the coating extends over the loss onto the gesso below, which is strange.

In order to start characterizing the coating, I looked at the box under different light sources and did a microchemical spot test, all described here. All roads were leading toward the conclusion that the coating is pistacia resin, but since we had so many available samples (i.e. detached pieces of the varnish) I wanted to investigate further.

First, we turned to a resource that we have in-house: Fourier transform infrared spectroscopy, or FT-IR. FT-IR is a method of infrared spectroscopy, where IR radiation is passed through a sample, and some of the radiation is absorbed and some of it is passed through or transmitted. A spectrum is produced that represents the molecular absorption and transmission, which is unique to that material. I collected samples of detached varnish from the shabti box and from one of the shabti figures, and passed them along to Tessa de Alarcon, a conservator in our department, and consulting scholar Dr. Gretchen Hall. Here is what the spectra look like for each:

FT-IR spectra for samples of varnish from the shabti (top) and the shabti box (bottom).

FT-IR spectra for samples of varnish from the shabti (top) and the shabti box (bottom). The characteristic peaks are labeled on the top spectrum.

They look virtually identical, which confirms that the varnish on the box is the same as the varnish on the shabtis.

Dr. Hall then compared the spectrum for the shabti box sample to spectra for mastic (Pistacia lenticus) and terebinth (Pistacia terebinthus), both pistacia resins.

Spectra for (from top to bottom): the shabti box sample, a sample of terebinth, a sample of mastic from Chios purchased in Athens, and a sample of mastic from Kremer Pigments (the Kremer Pigment mastic sample spectrum was found in the IRUG database). IRUG = Infrared and Raman Users Group

Spectra for (from top to bottom): the shabti box sample, a sample of terebinth collected from the Uluburun shipwreck, a sample of mastic from Chios purchased in Athens, and a sample of mastic from Kremer Pigments Inc. (the comparative spectra were found in the IRUG database, IRUG = Infrared and Raman Users Group)

They all look very similar, with characteristic resinous acid peaks that occur between 1700 & 1720 cm-1 (carbonyl stretching) & the acid OH stretching that occurs ~1460 cm-1.

In order to see if we could classify the shabti box resin even further, Dr. Hall took a sample to Dr. Chris Petersen, Affiliated Associate Professor in the Winterthur/University of Delaware Program in Art Conservation (WUDPAC), where they analyzed it using Gas Chromatography-Mass Spectrometry (GC-MS). GC-MS is a technique that combines 2 methods of analysis, and in conservation we use it to analyze organic compounds.

Dr. Hall and Dr. Petersen ran the sample and here is what the GC-MS chromatogram looks like:

L-55-23A_GCMSlabeled2Dr. Petersen labeled the peaks and included their structures. The structures are consistent with pistacia resin, either mastic or terebinth. They did identify a peak for 28-norolean-17-en-3-one (#3 above), characteristic of heated pistacia resin, which could indicate that the resin was heated before application (which would have turned it from clear to a yellowed varnish). We cannot be certain what color the varnish was when it was first applied, but the analysis does confirm the fact that the shabti box and the shabtis all have aged pistacia resin coatings.

We are grateful to both Dr. Hall and Dr. Petersen for their work on this analysis!

 

Views inside a painted wooden coffin

Update – this post contains blurred images of human remains. To read more about this decision, follow this link. 

It is impossible not to see this object when you enter the Artifact Lab, as it’s front and center, and immediately impressive, due to its well-preserved painted details:

This is the lower-half of a Third Intermediate Period (21st Dynasty?) painted wooden coffin, that recently came up to the Artifact Lab. Our visitors are always commenting on how vibrant the colors are, and that is mostly based on what they can see from the exterior. But the interior of this coffin is fully decorated, and arguably even more impressive, and I promised some people this week that I’d post photos of the interior soon. Here they are:

Overall view of the interior of the coffin from above
Overall view of the interior of the coffin from above
coffin right side
View of the right side
coffin left side
View of the left side
View of the interior, top of the coffin
View of the interior, top of the coffin

The only areas on the coffin that are not decorated are the exterior of the back, and both sides of the foot/base.

All in all, this coffin is in great condition, but it needs some treatment, including surface cleaning and stabilization of the wood and paint in some areas.

There are also a few mysterious things about it, in particular, these drilled holes in the back – what the heck are these all about?

There are 8 rows of holes drilled through the back of the coffin
There are 8 rows of holes drilled through the back of the coffin

Stay tuned as we investigate further.